Air Compressor

An air compressor pressure switch is a device that controls the starting and stopping of an air compressor. It does this by sensing the pressure in the system and opening or closing the electrical contacts to turn the compressor on or off.

However, sometimes the pressure switch does not work properly. In this case, it is possible to adjust the air compressor pressure switch so that it operates in a proper manner. When you wish to learn details about air compressor, you’ve to click over here at Tools auditor website.

The Right Way to Adjust Your Air Compressor’s Pressure Switch

Adjusting your air compressor’s pressure switch is actually easier than you think. By following these simple steps, you can get it done in no time:

1. Shut off the Power:

It is important to switch off the power before adjusting your air compressor’s pressure switch. It is also good to disconnect the power cord from the outlet.

2. Locate the Adjustment Screws:

Once you have located the pressure switch, you will see two adjustment screws on the side of it. One is for adjusting the cut-in pressure, and the other is for adjusting the cut-out pressure.

3. Adjust the Cut-in Pressure:

You can adjust the cut-in pressure by turning the adjusting screw clockwise if you would like to increase the pressure or counterclockwise if you would like to decrease it.

4. Adjust the Cut-out Pressure:

To adjust the cut-out pressure, turn the adjusting screw in the opposite direction of what you did to change the cut-in pressure.

5. Test the Pressure Switch:

Once you have adjusted your air compressor’s pressure switch, it is important to test it out to ensure that it works properly. Simply turn on the power and try starting up your compressor to do this.

If you are having problems with your air compressor’s pressure switch, adjusting it is an effective solution. By following the steps above, you can quickly and easily make adjustments to ensure that your compressor runs properly. Always make sure to read the owner’s manual for your air compressor before making any adjustments to the pressure switch. Also read how to use angle grinder on concreate.

How to Tell If the Pressure Switch Is Not Working Properly?

Here are some common symptoms that may indicate a problem with your air compressor’s pressure switch:

  • Your compressor will not turn on even when the pressure is low.
  • The compressor keeps cycling without reaching the desired pressure level.
  • You notice squealing or buzzing noises coming from the compressor while it is running.
  • As soon as pressure reaches the desired level, the compressors are turned off.
  • Compressors stop after short periods of time.

If you are experiencing any of these issues, your pressure switch likely needs to be adjusted.

Conclusion

Now that you know how to adjust an air compressor pressure switch, you can easily resolve any issues that may be causing problems with your compressor. It is important to remember to always read the owner’s manual for your compressor before making any adjustments. Additionally, be sure to test your compressor after making any adjustments to ensure that it is working properly.